Saturday, 25. February 2012
![Zap - Zap-a Gap ca 2oz Bottl (PT01) [Toy]](http://ecx.images-amazon.com/images/I/31%2BoSN5BAkL._SL160_.jpg)
- SUPERIOR GAP FILLING FORMULA
- MEDIUM VISCOSITY
- AVERAGE OF 20 SECONDS FOR CURING
- ALLOWS APPROXIMATELY 7 TO 10 SECONDS FOR PART POSITIONING.
This bottle of Zap a Gap has a gap filling formula with a working time of 7 to 10 seconds. Allows time for proper positioning of parts. 20 second cure time. Bonds anything to anything. Works on oily surfaces too!
Friday, 24. February 2012
Vinyl spray adhesive x 6
Friday, 24. February 2012
* Nylon Washers * Material:Nylon 6.6 * Thread size:M3 * Thread type:Metric * Quantity, box:50
Thursday, 23. February 2012
- Includes Limited Edition GB Key Chain
For additional privacy and security. Overall size: 344 x 78mm; Aperture Size: 310 x 80mm. Fixings not supplied.
Wednesday, 22. February 2012
- Includes Free ‘Made in Great Britain’ Keyring
* 243 Nutlock * Designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools * Prevents loosening and leakage from shock and vibration * Ideal for use on pumps or motor mounting bolts, engine rocker nuts, equipment housing screws, gear boxes and presses * Tolerant of oil and other contamination * Cures reliably * Size: 10ml
Tuesday, 21. February 2012
Unibond Grout Revivers are the 1st and only anti-mould revivers in the market which are safe to use. They are a water based and low hazard product, delivering ultimate protection in a single application and leaving a highly water resistant, ice white finish. It is ideal for revitalising old, discoloured grout, bringing instant refreshment to tired looking tiles.
Monday, 20. February 2012
- Part Number: 603
- Size: 10ml
Loctite 603 General Purpose – Retaining Compound (Improved 601) 10mlFor retaining close fitting cylindrical parts (up to 0.1 mm gap) and for use on cylindrical fitting parts where thorough degreasing is not possible.Approvals: ? Tested and approved by leading bearing manufacturers ? P1 NSF Reg. No.: 123003Typical applications include retaining roller bearings or oil impregnated bushings into housings.Specifications:? Strength Required: Medium ? Handling Strength (at room temperature on steel joi
Monday, 20. February 2012
- Magnetic Face: 3mm dia
- Thickness: 1mm
- Vertical Pull (Kg): 0.09
- Slide Resistance (Kg): 0.018
- Fixing: Araldite/Loctite
A pack of 50 – 3mm dia x 1mm thick N42 Neodymium Magnets. The NORTH pole is on one circular face and the SOUTH pole is on the opposite face. These Magnets are plated with 3 layers of protective coatings – Nickel + Copper + Nickel (Ni-Cu-Ni). These magnets will have approximately 2500 Gauss on each face. Each magnet can support a steel weight of up to 0.09kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also s
