Friday, 10. February 2012
- Magnetic Face: 20mm dia
- Thickness: 10mm
- Vertical Pull (Kg): 8.8
- Slide Resistance (Kg): 1.76
- Fixing: Araldite/Loctite
A pack of 2 – 20mm dia x 10mm thick N38SH Neodymium Magnets. The NORTH pole is on one circular face and the SOUTH pole is on the opposite face. These Magnets are plated with 3 layers of protective coatings – Nickel + Copper + Nickel (Ni-Cu-Ni). These magnets will have approximately 4600 Gauss on each face. Each magnet can support a steel weight of up to 8.8kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also
Tuesday, 17. January 2012
- Circular Face: 20mm dia
- Thickness: 20mm
- Fixing: Araldite/Loctite
A pack of 1 – 20mm dia x 20mm thick Diametrically Magnetised N42 Neodymium Magnets. The NORTH pole is on one curved side and the SOUTH pole is on the opposite curved side. These Magnets are plated with 3 layers of protective coatings – Nickel + Copper + Nickel (Ni-Cu-Ni). These magnets will have approximately 6100 Gauss on each face. These magnets can be fixed in place using Araldite/Loctite and have a maximum operating temperature of 80 degrees C.
Monday, 9. January 2012
- Magnetic Face: 23mm dia
- Thickness: 20mm
- Vertical Pull (Kg): 16
- Slide Resistance (Kg): 3.2
- Fixing: Araldite/Loctite
EXTREME POWER WARNING! – These magnets are dangerous! If your fingers are trapped between two they will cut the skin. Please note that they should only be handled with great care. A pack of 1 – 23mm dia x 20mm thick N42 Neodymium Magnet. The NORTH pole is on one circular face and the SOUTH pole is on the opposite face. These Magnets are plated with 3 layers of protective coatings – Nickel + Copper + Nickel (Ni-Cu-Ni). These magnets will have approximately 5600 Gauss on each face. Each magnet
Monday, 9. January 2012
- Magnetic Face: 60 x 20
- Thickness: 15mm
- Vertical Pull (Kg): 3.3
- Slide Resistance (Kg): 0.66
- Fixing: Araldite/Loctite
A pack of 2 – 60mm x 20mm x 15mm thick Y30BH Ferrite Magnets. The NORTH pole is on one 60 x 20mm rectangular face and the SOUTH is on the opposite face. These Magnets do not require any protective plating. Each magnet can support a steel weight of up to 3.3kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also support up to 0.66kgs in a shear position before beginning to slide down a steel surface under the sa
