Tuesday, 15. May 2012
- Magnetic Face: 6mm dia
- Thickness: 6mm
- Vertical Pull (Kg): 1.1
- Slide Resistance (Kg): 0.22
- Fixing: Araldite/Loctite
A pack of 25 – 6mm dia x 6mm thick N42 Neodymium Magnets. The NORTH pole is on one circular face and the SOUTH pole is on the opposite face. These Magnets are plated with 3 layers of protective coatings – Nickel + Copper + Nickel (Ni-Cu-Ni). These magnets will have approximately 4700 Gauss on each face. Each magnet can support a steel weight of up to 1.1kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also su
Friday, 20. April 2012
- Magnetic Face: 9mm dia
- Thickness: 3mm
- Vertical Pull (Kg): 1.36
- Slide Resistance (Kg): 0.272
- Fixing: Araldite/Loctite
A pack of 20 – 9mm dia x 3mm thick N42 Neodymium Magnets. The NORTH pole is on one circular face and the SOUTH pole is on the opposite face. These Magnets are plated with 3 layers of protective coatings – Nickel + Copper + Nickel (Ni-Cu-Ni). These magnets will have approximately 2600 Gauss on each face. Each magnet can support a steel weight of up to 1.36kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also s
Tuesday, 3. April 2012
- Magnetic Face: 152.4 x 101.4mm
- Thickness: 25.4mm
- Vertical Pull (Kg): 8
- Slide Resistance (Kg): 1.6
- Fixing: Araldite/Loctite
EXTREME POWER WARNING! – These magnets are dangerous! If your fingers are trapped between two they will cut the skin. Please note that they should only be handled with great care. A pack of 1 – 152.4mm x 101.4mm x 25.4mm thick Y30BH Ferrite Magnets. The NORTH pole is on one 152.4 x 101.4mm rectangular face and the SOUTH is on the opposite face. These Magnets do not require any protective plating. These magnets will have approximately 900 Gauss on each face. Each magnet can support a steel wei
Tuesday, 27. March 2012
- Magnetic Face: 10 x 10mm
- Thickness: 5mm
- Vertical Pull (Kg): 2.8
- Slide Resistance (Kg): 0.56
- Fixing: Araldite/Loctite
A pack of 10 – 10mm x 10mm x 5mm thick N42 Neodymium Magnets. The NORTH pole is on one 10 x 10mm square face and the SOUTH is on the opposite face. These Magnets are plated with 3 layers of protective coatings – Nickel + Copper + Nickel (Ni-Cu-Ni). These magnets will have approximately 3960 Gauss on each face. Each magnet can support a steel weight of up to 2.8kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can
Sunday, 25. March 2012
- Magnetic Face: 12mm dia
- Thickness: 2mm
- Vertical Pull (Kg): 1.2
- Slide Resistance (Kg): 0.24
- Fixing: Araldite/Loctite
A pack of 20 – 12mm dia x 2mm thick N42 Neodymium Magnets. The NORTH pole is on one circular face and the SOUTH pole is on the opposite face. These Magnets are plated with 3 layers of protective coatings – Nickel + Copper + Nickel (Ni-Cu-Ni). These magnets will have approximately 2000 Gauss on each face. Each magnet can support a steel weight of up to 1.2kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also s
Monday, 20. February 2012
- Magnetic Face: 3mm dia
- Thickness: 1mm
- Vertical Pull (Kg): 0.09
- Slide Resistance (Kg): 0.018
- Fixing: Araldite/Loctite
A pack of 50 – 3mm dia x 1mm thick N42 Neodymium Magnets. The NORTH pole is on one circular face and the SOUTH pole is on the opposite face. These Magnets are plated with 3 layers of protective coatings – Nickel + Copper + Nickel (Ni-Cu-Ni). These magnets will have approximately 2500 Gauss on each face. Each magnet can support a steel weight of up to 0.09kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also s
Friday, 10. February 2012
- Magnetic Face: 20mm dia
- Thickness: 10mm
- Vertical Pull (Kg): 8.8
- Slide Resistance (Kg): 1.76
- Fixing: Araldite/Loctite
A pack of 2 – 20mm dia x 10mm thick N38SH Neodymium Magnets. The NORTH pole is on one circular face and the SOUTH pole is on the opposite face. These Magnets are plated with 3 layers of protective coatings – Nickel + Copper + Nickel (Ni-Cu-Ni). These magnets will have approximately 4600 Gauss on each face. Each magnet can support a steel weight of up to 8.8kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also
Saturday, 4. February 2012
- Magnetic Face: 12mm dia
- Thickness: 1mm
- Vertical Pull (Kg): 0.56
- Slide Resistance (Kg): 0.112
- Fixing: Araldite/Loctite
A pack of 20 – 12mm dia x 1mm thick N42 Neodymium Magnets. The NORTH pole is on one circular face and the SOUTH pole is on the opposite face. These Magnets are plated with 3 layers of protective coatings – Nickel + Copper + Nickel (Ni-Cu-Ni). These magnets will have approximately 1085 Gauss on each face. Each magnet can support a steel weight of up to 0.56kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each magnet can also
Monday, 30. January 2012
- Magnetic Face: 10mm dia
- Thickness: 5mm
- Vertical Pull (Kg): 2
- Slide Resistance (Kg): 0.4
- Fixing: M3 c/s Screw
A pack of 10 – 10mm dia x 5mm thick x 3.2mm c/sink N42 Neodymium Magnets. The NORTH pole is on the countersunk face and the SOUTH pole is on the opposite face. These Magnets are plated with 3 layers of protective coatings – Nickel + Copper + Nickel (Ni-Cu-Ni). These magnets will have approximately 4400 Gauss on each face. Each magnet can support a steel weight of up to 2kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet. Each m
Tuesday, 17. January 2012
- Circular Face: 20mm dia
- Thickness: 20mm
- Fixing: Araldite/Loctite
A pack of 1 – 20mm dia x 20mm thick Diametrically Magnetised N42 Neodymium Magnets. The NORTH pole is on one curved side and the SOUTH pole is on the opposite curved side. These Magnets are plated with 3 layers of protective coatings – Nickel + Copper + Nickel (Ni-Cu-Ni). These magnets will have approximately 6100 Gauss on each face. These magnets can be fixed in place using Araldite/Loctite and have a maximum operating temperature of 80 degrees C.
